About Hot Water. GEAppliances.com
To Use Hot Water Dispenser
• Press HOTWATER button.
• Select desired water temperature on the LCDscreen (90, 150,
170, 185, or Custom).
• When hot water is ready (indicated on the screen and by a
beeping sound) hold container with left hand centered in the
recess under the spout.
• To dispense water, rotate the hot water knob counterclockwise
and then push it in. The knob must be held in during dispense.
Important Facts about HOT WA TER
Scalding Hazard.
The water coming from the dispenser is very hot and can cause
scalds or burns. Read all warnings prior to use. (Seepage 4.)
Always use a container that issuitable for hot liquids (ceramic,
styrofoam, etc.)
The maximum single hot water dispense amount is 10 oz.
Additional hot water can be dispensed by restarting the hot
water feature through the LCDscreen.
HOTWATERworks best with household water pressure of 40 to
1O0 psi.
HOTWATERwill time out if unused and may require a short
reheat time.
11
To Next Page
Loading...
Need help?
General
