Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
l'_ REMOVETHE FREEZERDOOR
E] Pullthe freezer door open to full extension,
r_ Remove3 attachment screws, located at the bottom
on each sideof the freezerdoor using3/8" hexsocket
driver,
i
_ Lifting Hazard
Freezerdoor isheavy Useboth handsto secure the
door before lifting,
[] Liftthe freezer door to disengage itfrom the slide
mechanism
Thedoor can safelyrest on the bottom, Do not rest the
door on any other surfacesto avoid scratches,
Pushthe slide mechanism back completely until it self
retracts,
E] REPLACING THE FREEZERDOOR
r_ Pullthe slide Mechanism to full extensionusing both
hands simultaneously,
r_ Removethe basket resting on the slides,
_1|1 ',..... -"
Lifting Hazard
Freezer door is heavy Use both hands to secure the
door before lifting,
r_ Liftthe freezer door and placeit on the slidemechanism
Align and insert
tab on freezer
door bracket
into slot on
freezer slide
bracket,
r_ Replacethe attachment screws and torque the screws
to 65 in-lb
r_ Foradjusting freezer door gaps, follow the instructions
on pg 27,
r_ Replacethe basket
26
To Next Page
Loading...
Need help?
General
