– 16 –
Pedestal Installation (Washer and Dryer)
Optional 12-inch high storage drawer pedestals with
dividers are available to provide convenience and
extra storage space for detergent, dryer sheets and
other cleaning supplies. The pedestal installation kit
includes 4 support pads, 4 mounting screws, and 4
leveling legs with locknuts.
WARNING: Due to the size and weight of the
washer or dryer, and to reduce the risk of personal
injury or damage, 2 people are required for proper
installation.
Note:
DO NOT remove washer shipping bolts prior to
pedestal installation. Shipping bolts MUST be
reinstalled, if previously removed.
Care should always be taken when laying
the washer or dryer on its side to prevent
component damage.
Do not lay washer or dryer on its back. Use a
pad or protective surface when laying washer or
dryer on its side.
To install the pedestal:
Lay the washer or dryer on its side.
Remove the 4 leveling legs.
•
•
•
1.
2.
(Continued Next Page)
4 Support Pads
4 Mounting Screws
Kit Contents
Phillips-head Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8-mm Socket Wrench
Tools Needed
Back out and remove
all 4 leveling legs
4 Leveling Legs
with Locknuts
To Next Page
Loading...
