How to load the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes
may
be unnecessarily
wrinkled.
Loads should look like this:
Drum
w;th
Cottons & Linens
Drum with
Permanent Press Load
Clean the lint filter before
drying every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of
filter and wiping in
a downward motion all the way
across to the other corner.
For additional information on lint
filter, see page 13.
Ene~y-Saving
~ps
●
Sort clothes by weight so you won’t
have to run an extra cycle for one or
two heavier, slower-drying items.
See page 8.
● Do not overload dryer. For
efficient drying, clothes need
to
tumble freely.
● Use Automatic Drying Cycles
whenever possible to help prevent
overdying and to save energy.
●
To help prevent ironing, use
● Clean dryer lint filter each time
Perm
Press Medium Heat or
you dry.
Knits/Delicates
Low Heat. Remove
garments promptly at end of drying
. Clean dryer exhaust
ducting
at
Iwst
cycle and place on hangers.
once a year. A partially clogged
exhaust can lengthen drying time.
. Dry your clothes in consecutive
loads. Using a “warm” dryer will
save energy.
9
To Next Page
Loading...
Need help?
General
