Care and Cleaning
USER
MMNTEN~CE
INSTRUCTIONS
mod
dryer care
The Drum.
Porcelain enamel
drum is rust-resistant and requires
no special care.
The Exterior.
Wipe off any spills or
washing compounds. Wipe or dust
with damp cloth. Try not to strike
the surface with sharp objects.
The Lint Filter.
Wipe lint filter
before every use as described on
page 9. Periodically lint filter
should be removed and suction
hose from vacuum cleaner should
be inserted into the opening.
See below.
~----
Do not obstruct the flow of
combustion and ventilating air. The
air intake is located on rear of dryer.
Dryer Exhaust:
Inspect and clean
the dryer exhaust ducting at least
once a year.
To store dryer
for a short period of
time, disconnect power supply and
clean lint filter.
Do not store dryer where it will be
exposed to the weather.
CAUTIONS:
ā
Before having your electric dryer
connected in your new residence,
be sure your licensed electrician
confirms that the supply voltage
matches the voltage specified on
the rating plate.
c
Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain remover
products if such products are
sprayed on or have direct contact
with the dryer.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products
is not covered by your warranty.
How
b
replace
Drm
hp
BEFORE REPLACING LIGHT
BULB, BE SURE
TO
UNPLUG
THE DRYER POWER CORD.
Unscrew the bulb and replace it
with the same type 10 watt bulb.
Make sure there is at least 3ā
clearance from rear dryer louvers
to the wall.
13
To Next Page
Loading...
Need help?
General
