GE Dryer Use And Care Guide

Wipe off any spills or washing
compounds. Wipe or dust with a
damp cloth. Try not to strike the
surface with sharp objects.
Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain
remover products if such products
are sprayed on or have direct
contact with the dryer.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products is
not covered by your warranty.
Operating Instructions/Care and Cleaning
To keep your dryer
operating at peak
performance.
periodically, remove
the lint filter and
insert the suction hose
from your vacuum
cleaner into the
opening.
Polyester K nits & Perm anent Press Drying Tips
• DO NOT OV ERLOAD-
Garments being dried or
dewrinkled should tumble
freely.
• REMOV E CLOTHES
PROMPTLY -
To help prevent wrinkling,
remove clothes from the dryer
promptly at the end of the
drying cycles.
• PLACE ON HANGERS-
Permanent press and polyester
knit garments look best if
placed on hangers after drying.
OPERATING YOUR DRYER
H OW TO L OAD TH E CL OTH ES
CARE AND CL EANING
CARE AND CL EANING
Don’t overload your dryer. Crowded
loads don’t dry efficiently and clothes
may be unnecessarily wrinkled. Loads
should look like this:
H OW TO SORT CL OTH ES
As a general rule, sort clothes by surface texture, fabric, colour and weight, as you would for your washer.
Dryer Ex terior
L int filter
B efore every
dryer use, clean the
lint filter. Put your
moistened fingers at
one side of the filter
and wipe in a sideways
motion all the way
across to the other side.
11
This signal should always be used when drying
polyester knits or permanent press items which should
be removed as soon as the dryer stops to help prevent
setting of wrinkles.
If the signal is on and you choose the Extra Care
Cycle, you will hear the signal sound on and off
throughout the cycle. This reminds you that the
clothes are dry.
Start. Turn the Start knob to start the dryer.
(Opening the door during operation stops the
dryer. To restart, close the door and follow
above directions.)
COL OR L OGIC (Av ailable on som e m odels)
Select the correct FAB RIC CARE setting. Match the
particular color below the words with the same color on the
Cycle Dial.
Example: Drying a load of clothing labeled permanent press.
1. Choose the FAB RIC CARE setting - for this load it
would be the EASY CARE MED HEAT (which is a
particular color).
2. Turn the Cycle Dial to the area that has the same color as
the FAB RIC CARE setting you have chosen - for this
load it would be the EASY CARE PERM PRESS.
\

GE Dryer Specifications

General

Brand	GE
Model	Dryer
Category	Dryer
Language	English