About Appliance Communication. GEAppliances.com
CleanSpeak"
Thiswasher can communicate with a compatible
dryer (one whose Owner's Manual contains a
CleonSpeok description) via a cable between these
appliances. Thiscable comes with CleonSpeok
dryer models or may be purchased separately.
Dryer
Washer
At the end of the wash cycle, the washer sends a
signal to the dryer to indicated a preferred dry cycle.
When the dryer becomes idle ("End" display times
out - or- the door isopened) "CYCLE"will scroll
across its cycle time display, its current cycle knob
setting LEDwill be lit, and (if different) a second
recommended cycle LEDwill blink. If "CYCLE"times
out, pressing Power will refresh it and the LEDs.If
the dryer cycle knob is turned, the solid LEDwill
move accordingly. Pressingthe dryer Start will
initiate the cycle knob setting (solid LED)and turn off
the recommended (blinkingLED)if a different cycle
isstarted.
Brillion Enabled Communication
Thiswasher (and/or compatible dryer)can
communicate with your Home Computer and/or
iPhone®. By using the GENucleusTM Home Energy
Manager and Appliance Communication Module
(ACM)you will be able to seethe following:
On your home computer or iPhone®:
• Which cycle is running and what its current cycle
segment is(example,"Spinning").
• The estimated time remaining of the cycle that
has been selected.
• When a cycle has completed.
• Alerts notifying you ifthe washer needs
maintenance or servicing.
What your software allows you to do:
NOTE:Messages are displayed in English.See
www.gebrillion.com or call 1-800-220-6899 for
possible language options.
Cycle disploy will provide the current status of the
wosh cycle:
° Soak,Main Wash, Rinse,Spinor complete.
Alerts will notify you of problems. Some exomples:
• Long fill time
• Not reaching water temperature target
° Lidlock problem
• Pressureswitch error
Whot you will need for two-woy communication:
• Nucleus home energy manager model
• Appliance communication Module model
• Broadband connection with router (Wi-Fifor
iPhone® connection)
• Computer (Mac® or PC)and/or Internet capable
iPhone®
NOTE:If you also have a compatible Energy Smort
dryer, see Installation Instructions for additional
parts.
Instollation
Step 1: Install your Nucleus Home Energy Manger/
Cable - near your internet router.
Referto the Quick Start Guide/Installation
Instructions included with this devicefor
information needed to download software to a
desktop and/or iPhone®.
Step 2: Installyour Appliance Communication
Module (ACM)in your Laundry area. Determine
the most convenient location for your ACM.Install
the ACM according to the Quick Start/Installation
Instructions included with the device.
Step 3: Connect your ACMto your washer or dryer-
washer
Wosher
__ - OR -
--___Spli
jJ
TheACMcomes with a splitter,two 6'cables, and
a 1' cable (seeParts and Accessories). Ifyou also
have an Energy Smart dryer, usethe splitter to
connect both appliances. NOTE:If the dryer did not
come with a 6 foot cable,you may needto purchase
a second 6 foot cable (seeParts and Accessories).
For more information or questions, pleasevisit:
www.gebrillion.com or call 1-800-220-6899.
To Next Page
Loading...
Need help?
General
