OPERATION   Possible Causes  What To Do
Washer won’t operate  Washer is unplugged  •  Make sure cord is plugged securely into a working outlet.
  Water supply is turned off  •  Turn both hot and cold faucets fully on.
  Controls are not set properly • Check controls.
  /LGLVRSHQ³VDIHW\IHDWXUH  •  Close lid and reset cycle, to the beginning if necessary.   
  prevents agitation and  
  spinning when lid is up
  Circuit breaker/fuse is  •  Check house circuit breakers/fuses. Replace fuses or 
  tripped/blown    reset breaker. Washer should have a separate outlet.
  Electronics need to be reset  •   Unplug washer, wait 2 minutes, plug back in and press START.
  START was not pressed • Press START.
  Lid magnet missing  •   Call for service.
Time not shown   Unit filling  •  This is normal. Estimated time remaining is updated during    
on display   fill time.
Movement inside machine  Shifting mechanism is  •  When the machine is manually turned off, the shifter will 
when shut off  disengaging the motor    disengage the motor before completely shutting down. 
      If lid is raised before the motor is disengaged, it will resume  
      when lid is closed.
Basket seems loose  Basket moves or rotates freely  •  Washer basket does not have a traditional brake. Basket will 
   move freely. This is normal.
PERFORMANCE  Possible Causes  What To Do
Clothes too wet  Incorrect cycle selected.  •  Make sure the cycle selected matches the load you are  
      washing. Some fabrics will feel wetter when rinsed with cold water.
  Wash load out of balance • 
Redistribute load in washer and run through Drain & Spin cycle.
Colored spots  Incorrect use of fabric  •  Check fabric softener package for instructions and follow  
  softener    directions for using dispenser.
    •  Make sure you have selected the Fabric Softener option. 
    •  Pretreat stain and rewash.
  Dye transfer  •  Sort whites or lightly colored items from dark colors.
Grayed or yellowed  Detergent amount  •  Be sure to follow detergent manufacturer’s directions.
clothes
 Hard water  • Use a water conditioner or install  
      a water softener.
  Water is not hot enough  •  Make sure water heater is delivering water at  
   120°F–140°F (48°C–60°C).
  Washer is overloaded  •  Loosely load clothes no higher than the top row of holes in the  
      washer basket. For best results, load items around the outside  
      of the basket. 
  Detergent is not  •  Add detergent to the wash basket before you load clothes. 
  dissolving 
  Dye transfer  •  Sort clothes by color. If fabric label states wash separately,  
      unstable dyes may be indicated.
Lint or residue on  Clothes are air or line dried  •  If you do not dry your clothes with a clothes dryer, your 
clothes      clothes may retain more lint.
  Incorrect sorting  •  Separate lint producers from lint collectors.
  Washing too long  •  Wash small loads for a shorter time than larger loads.
  Detergent not dissolving  •  Add detergent to wash basket before you load clothes.
    •  Try a liquid detergent.
    •  Use warmer water temperature.
  Overloading  •  Loosely load clothes in the washer basket. For best results, load 
       items around the outside of the basket.
  Incorrect use of fabric  •  Check fabric softener package for instructions 
  softener    and follow directions for using dispenser.       
    •  Make sure you have selected the Fabric Softener option. 
 
GEAppliances.com
11