GE GBE17HYRFS User Manual

12 49-1000598 Rev. 0
Installation Instructions
REVERSING THE DOOR SWING (CONT.)
INSTALLATION INSTRUCTIONS
WARNING
)ROORZDOOVWHSVZKHQUHYHUVLQJ
WKHGRRUVZLQJ)DLOXUHWRIROORZWKHVHLQVWUXFWLRQV
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
8QVFUHZWKHORZHUKLQJH
from the case.
12. Change the position of the
plugs on the case from one
side to the other.
Freezer Door (Lower)
5HPRYHWKH)UHH]HU
/RZHU'RRU
14. Change the door stop at
the bottom of the door from
the current position to the
opposite side.
8QVFUHZWKHERWWRPKLQJH&KDQJHWKHERWWRP
foot from the current position to opposite side.
16. Take out the new bottom hinge from the
accessory bag and screw the new bottom hinge
to the other side of the door opening on the case.
17. Lift the lower door, carefully,
onto the bottom hinge so that
the pivot fits into the hinge
barrel.
7DNHRXWWKHQHZKLQJHIURP
the accessory bag and screw
the new middle hinge for the
upper door to the other
side of the door opening.
Be sure to seat the hinge
pivot into the hinge barrel
of the lower door.
Refrigerator Door (Upper)
/LIWWKHGRRUFDUHIXOO\RQWR
the middle hinge so that
the pivot fits in to the hinge
barrel.
20. Attach the upper hinge with
the screws.
21. Place the connector cable,
from the accessory bag,
through the hinge cover
and over the hinge.
22. Plug in the connector cable
and fit it into the opening.
23. Replace faceplate and
attach it with the screws.
Reinstall the cover from
the faceplate.
Check that the door seals are
all secured properly and all
screws are tightened.

GE GBE17HYRFS Specifications

General

Brand	GE
Model	GBE17HYRFS
Category	Refrigerator
Language	English