Need help?Do you have a question about the GE GFE26JMM and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | GFE26JMM |
| Category | Refrigerator |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Energy Star Certified | Yes |
| Color | Stainless Steel |
| Type | Side by Side |
| Width | 35.75 inches |
| Depth | 36.25 in. |
| Height | 69.875 inches |
Lists voltage, current, and resistance values for various refrigerator components.
Details pressure and refrigerant charge specifications for the cooling system.
Provides instructions for accessing the low-pressure side of the system for diagnosis.
Explains the function, diagnosing, and removal procedure for the Fresh Food (FF) door switches.
Explains the function, diagnosing, and connections of the dispenser control board.
Illustrates and labels the various connectors on the dispenser control board.
Identifies the various components located within the dispenser recess area.
Explains the paddle switch's function, diagnosing, and removal procedure.
Details the duct door motor's function, diagnosing, and removal.
Explains the articulating mullion's function, diagnosing, and removal procedure.
Explains the dual valve's function, diagnosing, and provides removal instructions.
Explains the function of diodes in preventing voltage feedback and their impact on valve operation.
Explains the ice box thermistor's function and its access procedure.
Details the auger motor's operation, diagnosing, and removal.
Explains the electronic icemaker's operation, ice production, and normal function.
Provides instructions for manually cycling the icemaker and checking voltages.
Identifies the two types of water filter cartridges and when to replace them.
Explains the location and function of the refrigerator thermistor for temperature regulation.
Describes the air tower's role in air travel and provides removal instructions.
Explains the damper's function in controlling airflow and its diagnosing/removal.
Describes the MWFP manifold assembly and provides removal instructions.
Describes the XWF manifold assembly and provides removal instructions.
Explains the location, function, and access procedure for the freezer thermistor.
Explains the function, diagnosing, and removal of the freezer drawer switch.
Explains what components are behind the evaporator cover and provides its removal procedure.
Describes the evaporator fan's function, diagnosing, and removal.
Explains the icemaker blower fan's function, diagnosing, and removal.
Describes the location, function, and access procedure for the evaporator thermistor.
Explains the defrost thermostat's function, diagnosing, and removal/replacement.
Details the defrost heater's function, diagnosing, and removal.
Describes the evaporator coil and provides its removal procedure.
Explains the adaptive defrost system and how it adjusts cycle times based on usage.
Defines abnormal defrost and the conditions for the next defrost cycle.
Explains how to diagnose issues with the main control board using its LED indicator.
Provides step-by-step instructions for removing the main board.
Provides a visual guide to the various connectors on the main control board.
Lists and describes the function of each connector on the main control board.
Explains the isolation valve's function, diagnosing, and removal procedure.
Details the compressor's type, diagnosing, and removal procedure.
Explains the flow of refrigerant through the system, including components and their functions.
Covers critical procedures for evacuating, purging, and charging the sealed refrigeration system.
Explains how to enter Service Mode for advanced diagnostics and tests.
Lists and describes various diagnostic tests available in Service Mode.
Presents the electrical schematic diagram for the refrigerator.
To Next Page
