About autofill. _ GEAppliances.com
To Use HANDS FREE AUTO FILL:
• Center container on Recess Dispenser Tray (not touching
bottom sensors) and remove hand from container
Press AUTO FILL
To Stop AUTO FILL
• Press CANCEL, to resume filling press AUTO FILL.
Important Facts about AUTO FILL
For optimum results, use a uniform container between 4-8"
tall and 2-5" wide. Container should be as tall as the bottom
sensors.
Container shape, fill level and functionality may vary on
containers taller than 8".
Container volumes may vary, if error message "Container
Not Found" is given, try a different container.
AUTO FELLwill time out.
Handles and garnishes on the rim of the container my cause
overfilling or variation in fill volumes.
• Splashing may occur depending on the location of the
container, water flow rate, container shape, and ice cubes.
Keep sensors clean with a clean damp cloth, and do not
spray liquid or cleaners directly on sensors
AUTO FILLworks best with household water pressure of 60
to 100 psi.
Sensors
_Select Models Only
11
To Next Page
Loading...
Need help?
General
