About the controls with temperature settin s.
PFE29,PYE23P Control Style A, LCD External Control
Cubed
PFE27, PYE23KControl Style B, LCD External Control
........'--"--'.,L-- J
\ __J L_ /
GFE29, GFE27, DFE29 Control Style C, External Control
f
J
c-
©
(D
c-
c-
c_
Q
c-
©
(D
W
e,l
Z
©
f _
I Refrigerotor
Hold 3 Sec for °F/°C
Recommended: 37 °F
Actuol Set
-13 c!°F
rloc
_,._Energy Smart
Recommended: O°F
i Freezer
Energy Smart Override
Hold 3 Seconds ...j
I DoorAlarm
I Ice Maker
I Lock Controls
Hold 3 Seconds
I Reset Filter
Hold 3 Seconds
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer
compartment, Allow 24 hours for the temperature to stabilize to the preset recommended settings,
The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and
freezer, The actual temperature may vary slightly from the SET temperature based on usage and operating environment,
To Next Page
Loading...
Need help?
General
