Installation Instructions
LEVEL THE FREEZER DOOR
Locate the height adjuster in the freezer door.
Slightly loosen the four Phillips-head screws
from the door on each side (right and left).
Loosen the controller screw with a Phillips-head
screwdriver to adjust the level.
14
A
B
SET THE CONTROLS
Set the controls to the recommended setting.
15
REMOVE PACKAGING
A) Remove all tape, foam and protective
packing from shelves and drawers.
16
23
LEVEL THE FREEZER DOOR (cont.)
Find the best position to align the door slope.
After adjustment, tighten all the screws.
14
C
D
Example: The slope is about
2 mm as shown below.
Rotate the height adjuster to +2.0
to reduce the door slope.
Reference
Plane
Slope
To Next Page
Loading...
