GE GLDT696D00SS - Materials You will Need; Tools You will Need

Installation Preparation
PARTS SUPPLIED:
[] Two #8 Phillips flat head wood screws, 5/8"long
to secure dishwasher to underside of countertop
(in literature package).
2 Wood Screws
MATERIALS YOU WILL NEED:
[] Ferrule, compression nut and 90° EIbow(3/8"NPT
external thread on one end, opposite end sized to
fit water supply)
[] Thread seal tape
[] UL Listed wire nuts(3)
90° Elbow,
Ferrule and
Compression Nut
Hand
Shut-Off
Valve
Wire Nuts (3)
Thread
Seal Tape
Materials For New Installations Only:
[] Air gap for drain hose, if required
[] Waste tee for house plumbing, if applicable
[] Electrical cable or power cord, if applicable
[] Screwtype hose clamps
[] Strain relief for electrical connection.
[] Hand shut-off valve
[] Water line 3/8"min. copper
[] Coupler for extending drain line, if applicable
Waste Tee
I
Air Gap
Hot Water line
Electrical Cable
(or Power Cord, if applicable)
Stro,nRe,,ef
Screw Type 0--_
Hose Clamps
Coupler
TOOLS YOU WILL NEED:
[] Phillips head screwdriver
[] 5/16"and 1//4"nutdriver
[] 6" Adjustable wrench
[] Level
[] Carpenters square
[] Measuring tape
[] Safety glosses
[] Flashlight
Phillips head
screwdriver
Measuring tape
Bucket to catch water when flushing the line
[]
[] Gloves
For New Installations Only:
[] Tubing cutter
[] Drill and appropriate bits
[] Hole saw set
Tubing cutter
5/16"and
1/4"nutdriver
Level
6" Adjustable
wrench
([[[__ Carpenters
square
Safety glasses Flashlight _-
Drill and Bits
Bucket
Hole saw set
Gloves