24
Installation Instructions
REPLACE THE BASE GRILLE
Replace the grille by installing the two
Phillips head screws.
8
SET THE CONTROLS
Set the controls to the recommended
setting.
9
START THE ICEMAKER
Set the icemaker power switch to the
ON position. The icemaker will not begin
to operate until it reaches its operating
temperature of 15°F (–9°C) or below. It will
then begin operation automatically. It will
take 2–3 days to fill the ice bin.
10
Power
switch
INSTALLING THE REFRIGERATOR (CONT.)
SCREW DOWN SUPPORT LEG
Screw down the support leg until it
touches the floor. This will prevent door
misalignment.
7
To Next Page
Loading...
