HOW TO LOAD YOUR
DISmASHER
This is a random mixed
load,
the most
~omm{)n
type
you
will
have.
Make sure dishes are properly loaded to insure that
water can reach the soiled surfaces. The wash arm in
the bottom sprays water up. The tower that rises in
the center sends water out over the dishes to wash the
items in the upper rack. A spray arm in the top washes
down also. Make sure to place tall items to the outside
so the upper wash arm is not blocked.
WATCH OUT FOR THIS.
The washer tower rises through the center of the
bottom rack during the wash and rinse portions of
the cycle. Don’t block it or load tall things next to it.
Also, be careful not to let a portion of an item such
as a pot or dish handle extend through the bottom
rack. This could
block
the wash arm and cause poor
washing results.
HOW TO LOAD THE TOP RACK
The top rack is best for glasses, cups and saucers.
Cups and glasses fit best along the sides. This is the
place for dishwasher-safe plastics, too. Make sure
small
plastic items are
lodged
in tightly so they can’t
fall onto the
Calrod@
heating element. Arrange
stemware so that it cannot move easily. Don’t let the
glasses touch each other.
Sauce pans, mixing bowls and other small items may
be placed—face down—in the top rack. The top rack
is handy for
all
kinds of odd shapes.
8
To Next Page
Loading...
Need help?
General
