GE GTE21 User Manual

20
Installation Instructions
REVERSING DOOR HANDLES –
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR (CONT.)
4. Insert the fastener into the
surface of the right side
of the freezer door with a
Phillips screwdriver.
5. For Plactic handle :
Attach handle to
the freezer door on
fastener and slide
upward to lock in
place with the screws
at the bottom of the
handle.
For Stainless
Steel Handle :
Attach the
handle to the
freezer door
with screws at
the bottom of
the handles.
Use 1/8” allen
wrench to
tighten the
set screw at
the top of
thehandle.
NOTE: Do not over-tighten.
6
REVERSING DOOR HANDLES –
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR
1. Remove the two screws
securing the top end of
the handle with a Phillips
screwdriver and remove the
GE badge.
2. For Plactic handle : Pull handle
up and off of the fastener on
the door
For Stainless
Steel handle:
Loosen set screw
on handle with
1/8” wrench and
remove handle.
3. Remove the fastener from the surface of the
refrigerator door, and cover the new vacant hole
with the plug from the opposite side..
6
REVERSING THE DOOR SWING (CONT.)

GE GTE21 Specifications

General

Brand	GE
Model	GTE21
Category	Refrigerator
Language	English