SHELVES and BINS
Note: Not all features are on all models.
Some models have wire shelves that
can
be
adjusted in the same manner.
Refrigerator
Compartment
To
remove:
Tilt the shelf up at the
front.
Lift the shelf up at the back
and
bring
the shelf
out.
To
replace:
While tilting the shelf up, insert
the
top
hook at the back of the shelf in
a
slot on
the
track.
Lower the front of the shelf
until
the
bottom
of the shelf locks
into
place.
Freezer
Compartment
To
remove:
Lift up the left side of the shelf
and
slide
it left into the
center
of
the
shelf
supports.
Rotate the right side of the shelf
up
and
out of the shelf
supports.
To
replace:
Holding
the shelf
diagonally,
insert
the
left end of the shelf into
the
center
of the
shelf
supports
on
the
side wall at the
desired
level.
Insert the right end of the shelf
into
the
shelf
supports
at the same
level.
Rest
each end of the shelf on
the
bottom
of
the shelf
supports.
NOTE:
For models with
an automatic
icemaker, the freezer shelf must
be
in
the
lower position for the ice cube bucket
to
catch
the
cubes.
Spillproof
Shelves
(on some models)
Spillproof
shelves have special edges
to
help
prevent
spills from
dripping
to
lower
shelves. To
remove
or
replace
the shelves,
see
Rearranging
the Shelves
.