GE GTS21

24
Installation Instructions
REVERSING THE DOOR SWING (CONT.)
REVERSING DOOR HANDLES –
TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
SIDE OF THE FREEZER DOOR
(CONT.)
4. Insert the mounting screw
into the surface of the right
side of the freezer door
with a Phillips screwdriver.
5. Align the handle with
the mounting screw.
6. Rotate the handle.
7. Secure the bottom end
of the handle by inserting
two screws and tightening
them with a Phillips
screwdriver.
NOTE: Do not over-tighten.
7
REVERSING DOOR HANDLES –
TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
SIDE OF THE FREEZER DOOR
1. Remove the two screws
securing the top end of
the handle with a Phillips
screwdriver.
2. Rotate the
handle out
and lift off of
the mounting
screw on the
refrigerator
door.
3. Remove the mounting
screw from the surface
of the refrigerator
door.
7