GE GUD27GSSMWWGE Installation Instructions

4
Installation Instructions
CONNECTING A GAS DRYER (skip for electric dryers)
• Before beginning the installation, turn off the circuit
breaker(s) or remove the dryer’s circuit fuse(s) at
the electrical box. Be sure the dryer
cord is unplugged from the wall.
• Turn the dryer’s gas shut-off valve in the supply line
to the OFF position.
• Disconnect and discard old flexible gas connector
and ducting material.
Shut-off
Valve
MATERIALS YOU WILL NEED
Ŷ
4” dia. metal elbow
Ŷ
Pipe compound or
PTFE tape
Ŷ
Flexible gas line
connector
Ŷ
Duct clamps (2) or
Spring clamps (2)
Ŷ
Safety glasses
Ŷ
4” dia. metal duct
(recommended)
Ŷ
Gloves
Ŷ
Soap solution for
leak detection
Ŷ
Exhaust hood
Ŷ
Duct tape
Ŷ
Gas pipe adapters (2)
(for 27” dryers only),
elbow (for 27” dryers
only) and pipe plug
TOOLS YOU WILL NEED
Ŷ
10” Adjustable
wrenches (2)
Ŷ
8” Pipe wrench
Ŷ
Flat-blade
screwdriver
Ŷ
Level
Ŷ
Slip-joint pliers
Ŷ
1/4” Nutdriver
Ŷ
4” dia., UL-listed
flexible metal duct
(if needed)

GE GUD27GSSMWWGE Specifications

General

Brand	GE
Model	GUD27GSSMWWGE
Category	Washer/Dryer
Language	English