EasyManuals Logo

GE JB630RFSS Dimensions And Installation Information

GE JB630RFSS
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Dimensions and Installation Information (in inches)
For answers to your Monogram
®
or GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Specification Revised 7/13
321576
JB630RF
GE
®
30" Free-Standing Electric Range
30
25
2-1/2
2-1/2
7-1/2
Acceptable electrical
outlet area
29-7/8
47
11
35-3/4
to
36-1/2
w/o handle
w/handle
47-7/8
28
25-1/2
30
" Free-Standing Electric
Single Oven
Receptacle Locations
Locally approved flexible service cord or conduit must be used
because terminals are not accessible after range installation.
See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly
against wall.
Note: 30" ranges conform to U.L. requirements for 0" spacing
from adjacent walls below countertops. To reduce possibility of
scorching walls, engineering recommends a minimum of 1-1/2"
spacing to allow for possible extended, high-heat, no-load
heating element operation.
Installation Information: Before installing, consult installation
instructions for current dimensional data and additional
requirements.
KW Rating
240V
11.3
208V
8.5
Breaker Size
40 Amps
Note: Check local codes for required breaker size.

Other manuals for GE JB630RFSS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JB630RFSS and is the answer not in the manual?

GE JB630RFSS Specifications

General IconGeneral
BrandGE
ModelJB630RFSS
CategoryRanges
LanguageEnglish

Related product manuals