J
Jesse KochAug 29, 2025
How to adjust oven temperature on GE JGB635 Ranges?
- TtolsonAug 30, 2025
If the oven temperature in your GE Ranges is too hot or too cold, the oven temperature may need adjustment. See the Oven Controls section.
To Next PageTo Next PageHow to adjust oven temperature on GE JGB635 Ranges?
If the oven temperature in your GE Ranges is too hot or too cold, the oven temperature may need adjustment. See the Oven Controls section.
Why is there excessive smoking during broiling in my GE Ranges oven?
If you experience excessive smoking during broiling in your GE Ranges, it could be because the food is too close to the burner element. Lower the rack position of the food.
Why is my GE JGB635 clock flashing?
If the clock on your GE range is flashing, it's likely due to a power outage or surge. Reset the clock. If the oven was in use during the outage, press the Cancel/Off pad, reset the clock, and then reset any cooking functions.
Why is "LOCK DOOR" flashing in the display of my GE Ranges?
If you see "LOCK DOOR" flashing in the display of your GE Ranges, the self-clean or steam-clean cycle has been selected, but the door is not locked. Lock the oven door.
How to adjust the temperature settings on my new GE JGB635 oven?
If your new GE Ranges oven doesn't cook like your old one, it may be because it has a different cooking system. For the first few uses, carefully follow recipe times and temperatures, and use the rack positions recommended in the Cooking Guide. If you still think your new oven is too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference.
How to fix excessive smoking during clean cycle on my GE JGB635?
If your GE range is smoking excessively during the clean cycle, it's likely due to excessive soil or grease. Turn the Oven Temperature Knob to OFF and wait for the oven to cool below the unlocking temperature. Open windows to vent the smoke, wipe up the excess soil, and then reset the clean cycle.
What to do if the oven door of my GE Ranges will not open?
If the oven door on your GE Ranges will not open when you want to cook, it is likely locked because the temperature inside the oven has not dropped below the locking temperature. Simply allow the oven to cool down until it is below the locking temperature.
What to do if the burners on my GE JGB635 Ranges do not light?
If your GE Ranges burners do not light, ensure the electrical plug is fully inserted into a properly grounded outlet. Also, check that the gas supply is connected and turned on. A blown fuse or tripped circuit breaker could also be the cause, so replace the fuse or reset the breaker. Incorrectly replaced burner parts, clogged burner slots, or food residue on the electrode can also prevent ignition. Refer to the Care and Cleaning section for proper burner replacement and cleaning. Lightly polish the electrode tip with a nail file or sandpaper if there's food residue.
Why don't the top burners on my GE Ranges burn evenly?
Uneven burning of the top burners on your GE Ranges can be caused by: * Improper burner assembly. Make sure the burner caps are seated correctly. See the Care and Cleaning section. * Clogged burner slots on the side of the burner. Remove the burners for cleaning. See the Care and Cleaning section.
Why won't my GE JGB635 Ranges oven self-clean?
If your GE Ranges oven will not self-clean, it could be due to a couple of reasons: * The oven temperature may be too high to start a self-clean cycle. Allow the oven to cool down and then reset the controls. * The oven controls may be improperly set. Refer to the Care and Cleaning section for guidance.
General