vvvvw.GEAppliances.com
Grate
BurnerCaD
Burnerhead
Electrode
Sealed Burner Assemblies--glass cooktop models
Turn all controls OFF befiwe removing the
burner parts.
The burner grates, caps and burner heads
can be lifted off, making them easy to
clean.
CAUTION:Donot operatetheburnerwithout
all burnerpartsinplace.
Electrode
/
When one bm'ner is turned to LITE,
all the bm'ne_ spark. Do not attempt
to disassemble or clean arotmd am'
burner while another bm'ner is on. An
electric shock may result, which could
Catlse VOtl to knock over hot cookware.
Burnerbase
After cleaning make sure the
nipple t7 the burner head is
positioned toward the electrode.
Rotate the burner head around the
burner base until it is level and
securely seated.
Burner Heads
NOTE."Beforaremoving theburner headsand
caps, rememberthe1?s/2eand location. Replace
themin the same location after cleaning
Theslits in theburner headsof yourrange must be
kept cleanat all times for an even, unhampered
flame.
You should clean the sm'fi_ce bm'ners
roufinel> especially after bad spillovers,
which could clog these openings.
To remove bm'ned-on food, soak the
bm'ner heads in a solution of mild liquid
detergent and hot wamr fin" 20-30 minutes.
For more stubborn stains, use a toothbrush.
Befin'e putting the bm'ner head back, shake
out excess water and then d_T it thoroughly
by setting it in a wam_ oven fi)i" 30 ininutes.
Replace the btlFneY heads and caps. Make
sure that the heads and caps are replaced
in the correct location. There are 2 large,
one nlediunl and one small head and cap.
sma,i
Medium
Burner Caps
I,ifl off when cool. Wash burner caps in hot,
soapy water and iinse with (lean watei: Y)I!
may scorn" with a plastic scorning pad to
remove bm'ned-on food particles.
Dry them in a wam_ oven or with a cloth--
don't reassemble them wet. Replace the
bm'ner caps.
Make sm'e that caps are replaced on the
correct size bm'ner. There are 2 large,
one medium and one small head and cap.
33
To Next Page
Loading...
