DIMENSIONSAND CLEARANCES
Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions
must be met for safe use of your range. Thelocation of the electrical outlet and pipe opening (see Gas
Pipe and Electric Outlet Locations) may be adjusted to meet specific requirements.
Therange maybe placed with 0" clearance (flush) at the back wall.
Depth with door closed #n_'ladesdoor handle)
1_,._... 30,, _....._1281/4 t° 29
•_ Depthvariesdependingon model
See specifications sheet for your model
T
Height
473A"
361/4" +_1/4"
Depthwithdooropen
463A"_ %% ...............
\ \ s.'"""
Minirnurn to
cabinets on
eitbel side of
the range
Minimom -'__- 2" Towaftoneitherside
sealedhomermodels
Maximom depth
for cabinets above
countertops
Oil
Tocabinetsbelow
cooktopandat the
rangeback
43
To Next Page
Loading...
