EasyManua.ls Logo

GE JGB910 - Page 50

GE JGB910
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installationof the range.
Read these instructions completely and carefully.
OuMity of Flames
The coinbustion qualiD' of burner flan/es needs to
be detem/ined visually.
(,4) Yellow flames--
Callfor service
(B) Yellowtipson
outer cones--
Normal for LP gas
(C)Soft blue
flames--Normal for
natural gas
If burner flameslook like (,4),carl for servlce.Normal burner
flamesshould look like(B) or (C),dependingon the type ofgas
you use.
_A]th I,P gas, soIne yellow til)ping on otlter cones
is nomial.
[]
Check Ignition of Oven Burner
The oven is designed to operate quietly and
autoniaficallv: To oi)ei'ate the oven, press the
BAKEpad and then press the nuniber pads until
350° al)peais in the display: Touch the START pad.
After 30-00 seconds, the oven burner will ignite
and burn until the set teInl)erature is reached.
The oven burner will continue to cycle on and
off as necessai_' to nlaintain the oven at the
teniperamre indicated by the display.
To check ignition of the broil burnei; touch the
BROILHI/tO pad and then the START pad. _MteI"
30-90 seconds, the broil burner will ignite.
Electricignitionmodelsrequire electrical power to
ol)erate, In case of a l)ower Otltnge, the ()veil
burnei_ on these niodels cannot be lit nlanuallv
with a nlatch. Gas will not flow unless the gh)w bar
is hot.
If the oven is in use when a power outage occuI_,
the burner will shut off and cannot be re-lit until
power is restored,
5O

Other manuals for GE JGB910

Related product manuals