Why won't the lower oven drawer or warming drawer work on my GE JGBP86?
If the lower oven drawer or warming drawer of your GE Ranges will not work, check if a fuse in your home has blown or if the circuit breaker has tripped and replace the fuse or reset the breaker. If the oven is self-cleaning, wait until the cycle is complete and the oven has cooled down. Also, make sure the controls are properly set.
How to fix a GE JGBP86 drawer that doesn't slide smoothly?
If the drawer on your GE Ranges does not slide smoothly or drags, the drawer may be out of alignment. Fully extend the drawer and push it all the way in. Additionally, the drawer might be overloaded or the load unbalanced. Try reducing the weight and redistributing the contents.
How do I get the display to show “SF” on my GE Ranges?
If you are unable to get the display to show “SF” on your GE Ranges, it is likely that the oven control pads were not pressed correctly. Ensure that the BAKE and BROIL HI/LO pads are touched simultaneously and held for 3 seconds.
Why is there a “burning” or “oily” odor from my new GE Ranges?
This is normal for a new GE Ranges oven. To speed up the process, set a self-clean cycle for a minimum of 3 hours.
Why is my GE JGBP86 Ranges making fan noise?
This is normal. The convection fan will run until the function is over or the door is opened.
Crucial safety information, including warnings about fire, explosion, and the anti-tip device.
Specific safety advice and warnings for using the surface burners.
Detailed guide on lighting, flame size, and safe use of gas surface burners.
Overview of oven control pads, clock, and timer functions.
Guidelines for oven shelves, vents, power outages, and oven light.
How to set immediate and delayed start/stop for baking and roasting.
Guide on using the temperature probe for cooking to internal temperatures.
Guidelines for convection bake and roast, including Auto Recipe conversion.
Setting immediate and delayed start/stop for convection baking.
Steps for preparing and starting the self-cleaning cycle.
Critical safety warnings and precautions for range installation.
Anti-tip device warning, location selection, and important pre-installation checks.
Instructions for gas supply requirements and connecting the range to gas.
Requirements for electrical hookup, grounding, and adapter usage.
Final steps for anti-tip device installation and LP gas conversion details.
To Next Page
General
