Usingthe self-cleaning oven. ovensoperatedwithto chpads;
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
HOUR el MIN
MIN
How to Delay the Start of Cleaning
[] Press the SELFCLF_ANpad.
[] Using tile HOURand MIN + or -
pads, enter the desired (lean time.
[] Press the DEIAYSTARTpad.
[] Using tlle HOURand MIN + or -
pads, enter the time of day you want
the clean cyde to slart.
[] Press the STARTpad.
Tile door locks automatically. The display
will show the stmt time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKEDDOOR
light goes oil
When tile LOCKEDDOORlight is oil open
tile door.
NOTE:Onmodelswithtouchpadcontro/sfor
bothovens,youcansetadelaydeaninboth
ovensat thesametime.Thesecondovensetwi//
automaticallydelaythestartofcleaninguntilthe
endofthefirstoven'sdeancycle.
Torecallthestart tYneof thesecondovenset,
presstheDELAYSTARTpadonthecontrolsfor
thesecondoven.
After a Clean Cycle
You inay notke some white ash in the
oven. Wipe it up _4tll a &m_p (loth after
the oven cools.
If whitespotsremain,removethemwitha soap-
filledsteelwoolpadandrinsethoroughlywitha
wnegarandwatermixture.
These deposits are usually asah
residue that cannot be removed by
tile clean _ycle.
If the oven is not (lean af/er one (lean
Q_(le, repeat tile Q_(le.
}!::You cannot set the oven for cooking
until tile oven is cool enough ti)r the
door to unlo(k.
i_?If the shelves become hard to
slide, wipe tile shelf supports with
cooking oil.
16
To Next Page
Loading...
Need help?
General
