BAKE Pad
Press this pad to select the bake function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for the
timer or automatic oven operations.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation and
a power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage.
COOKING TIME Pad
Press this pad and then press the number
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
DELAY START Pad
Use along with
COOKING TIME
or
SELF
CLEAN
pads to set the oven to start and
stop automatically at a time you set.
CLOCK Pad
Press this pad before setting the clock.
KITCHEN TIMER ON/OFF Pad
Press this pad to select the timer feature.
CLEAR/OFF Pad
Press this pad to cancel
ALL
oven
operations except the clock and timer.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the start time
and length of operation for timed baking
and self-cleaning.
START Pad
Must be pressed to start any cooking or
cleaning function.
SELF CLEAN Pad
Press this pad to select the self-cleaning
function. See the
Using the self-cleaning
oven
section.
OVEN LIGHT Pad
Press this pad to turn the oven light on
or off.
BROIL HI/LO Pad
Press this pad to select the broil function.
To Next Page
Loading...
Need help?
General
