EasyManuals Logo

GE JTP30 User Manual

GE JTP30
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
,Usingthe Sabbath Feature.
Gog÷ ro
H_ILO
LstorL,J
ffoo_i@
LTi_eJ
1 2 3 4 5
or
®®
Idependlng on model,
] Z 3 4 5
2 r
®
@
iaepending on modelt
When the display shows D the
oven is set in Sabbath. When the
display shows PC the oven is
baking/roasting.
How to Set Sabbath Feature for Timed Baking/Roasting - Immediate Start and
Automatic Stop
NOTE:Tounderstand how the oven control
works,practice using regular (non-Sabbath)
Immediate Start and Automatic Stop before
enteringthe Sabbath mode.
Makesure the clockshows the correct time of
day.
%
r21
@
%
Pressand hold both the Bake and Broil
Hi/Lo pads,at the same time, until the
display shows SF.
NOTE:If bake or broil appears in the
display,the Bake and Broil Hi/Lo pads
were not pressed at the same time. Press
the Clear/Off pad and begin again.
Tapthe Delay Start pad until SAbbAtH
appears in the display.
Pressthe Start pad and D will appear in
the display.
Press the Cooking Time pad.
@
@
On models with number pads,press them
to set the desiredlength of cooking time
between 1 minute and 9 hours and 99
minutes.
On models with Hourand fin + or -
pads,press them to set the desired length
of cooking time between i minute and 9
hours and 59 minutes.
Thecooking time that you entered will be
displayed.
Pressthe Start pad.
P[essthe Bake pad.No signal will be
Ir I
given.
r_ on models with number pads, pressthem
in order to set the desired temperature.
On models with Temp + and - pads,
the preset starting temperature will
automatically be set to 350°.Tap the
Temp + or - pads to increase or decrease
the temperature in 5° increments.(The
Temp + or - pad should be tapped for
eachtemperature change; pressing and
holding these pads will not allow accurate
temperature setting.)The temperature
can be set between 170°and 550°.
%
[]
No signalor temperature will be given.
Pressthe Start pad.
After a random delay period of
approximately 30 secondsto i minute,
DC will appear in the display indicating
that the oven is baking/roasting. If De
does not appear in the display,start again
at step 7.
To adjust the oventemperature, pressthe
Bakepad and enter the new temperature
usingthe number pads (onsome models)or
tap the Temp + or - pads (on some models)
to increase or decrease the temperature in 5°
increments.(TheTemp + or - pad should be
tapped for each temperature change; pressing
and holding these pads will not allow accurate
temperature setting.)
Pressthe Start pad.
When cooking isfinished, the display will
change from DC to D and 0:00 will appear,
indicating that the oven hasturned OFFbut is
stillset in Sabbath. Removethe cooked food.
Hi/Lo
How to Exit the Sabbath Feature
rl] Pressthe Clear/Off pad.
r21
@
%
Ifthe oven is cooking,wait for a random
delay period of approximately 30 seconds
to 1 minute, until onlyD is in the display.
Pressand hold both the Bake and Broil
Hi/Lo pads,at the same time, until the
display shows SF.
Tap the Delay Start pad until 12 shdn
or no shdn appears in the display. 12
shdn indicates that the oven will
automatically turn off after 12 hours.
no shdn indicates that the oven will not
automatically turn off.
[] Press the Start pad.
NOTE:If a power outage occurred while
the oven was in Sabbath mode,the oven will
automatically turn off and the oven control
must be reset.
22

Other manuals for GE JTP30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JTP30 and is the answer not in the manual?

GE JTP30 Specifications

General IconGeneral
BrandGE
ModelJTP30
CategoryOven
LanguageEnglish

Related product manuals