COMBINATION AUTO ROAST
combination Auto Roast is similar to combination
temperature cooking, using both microwave and
convection cooking in conjunction with the
temperature probe. However, the Combination
Auto Roast feature eliminates most of the steps
necessary to program combination temperature
cooking. Instead, you can set the entire cooking
program by selecting just one Combination Auto
Roast code.
The food is placed in a glass dish on a trivet for
cooking during Combination Auto Roast. To select a
code from 1 to 4, see the Combination Auto Roast
Guide below.
How to Combination Auto Roast
(The metal shelf must be in place on the oven floor
when using convection or combination cooking.)
Step 1: Insert temperature probe into the meat and
plug the probe firmly into the oven wall receptacle.
Step 2: Touch the Combination
AUTO ROAST pad.
"Auto" replaces the
time of day on the
display and "ENTER
CODE" flashes.
I START
Step 3: Enter the desired combination
Auto Roast code by touching a number
pad from 1 to 4. For example, touch
number pad 1 for Beef, medium.
Step 4: Touch START.
In this example,
"MEd,'" "COMB"
and "CODE 1" are
displayed.
m
AUTOIm_T ]
If you want to see the actual food
temperature, press the Combination
AUTO ROAST pad.
The probe temperature
will be displayed as
long as the pad is
pressed.
m
When the food reaches the programmed temperature
for proper degree of doneness, the display shows
"End" and the oven signals and turns off.
Combination Auto Roast Guide (UseProbe)
Food
Beet; Medium
Well
Lamb, Medium
Well
Pork
Chicken, whole
Temp
160°F.
190°E
170°E
190°F.
190°E
190°E
Doneness
Code Display
1 MEd
3 WELL
2 MEd
3 WELL
4 WELL
4 WELL
(continued next page)
37
To Next Page
Loading...
Need help?
General
