To Next PageTo Next PageWhat to do if GE JXSOUSV1 cooktop turns off while cooking?
If your GE Cooking Equipment cooktop turns off while cooking, it might be due to the water level dropping too low. To prevent this, cover the cookware with aluminum foil to slow evaporation or add water periodically to keep the probe submerged. Another reason might be the loss of communication between the Probe and Communication Module, so ensure that the probe is charged.
Why GE Cooking Equipment cooktop does not enter Precision Cooking Mode?
The GE Cooking Equipment cooktop might not enter Precision Cooking Mode if you're using the wrong cooktop element; use the largest induction element for Precision Cooking Mode. Ensure you touch and hold the On/Off button of the largest element for 3 seconds to enter Precision Cooking Mode. Also, verify that the Communication Module is plugged into the bottom of the cooktop and that the Probe and Communication Module are paired. If devices do not pair, disconnect and reconnect Communication Module. Finally, if your cooktop model number contains the number ‘+H8 5’-1%%’ then the software needs to be updated. Please contact us at assistance for assistance.
What to do if GE JXSOUSV1 enters Precision Cooking Mode but does not heat?
If your GE Cooking Equipment cooktop enters Precision Cooking Mode but does not heat, it might be because you have not completed the two-step process. After entering Precision Cooking Mode, touch the plus (+) icon corresponding to the largest element, then set the temperature using the + or - arrows.
How to turn on the probe for GE JXSOUSV1?
If the probe doesn’t turn on, charge the probe using the included USB cable. Also, make sure you press and hold the Probe Power Button for 3 seconds to turn it on.
General| Brand | GE |
|---|---|
| Model | JXSOUSV1 |
| Category | Cooking Equipment |
| Language | English |
Key safety alerts and warnings for potential hazards during use.
Overview of the Precision Cooking Probe's function and cooktop compatibility.
Lists and illustrates all components included in the Precision Cooking Probe kit.
Step-by-step instructions for connecting and preparing the Precision Cooking Probe.
Instructions for operating the Precision Cooking Probe with the induction cooktop.
Procedures for cleaning the probe and proper disposal of electronic components.
Guide to diagnose and resolve common problems encountered during probe operation.
Explains the meaning of various status indicators on the probe and communication module.
Details on regulatory compliance, including FCC and IC statements for the device.
Outlines the terms, conditions, and duration of the product's limited warranty.
