Door
alarm
To turn the Door Alarm feature on, press
DOOR ALARM once. The ACTIVE light will
come on. To turn it off, press it again.
When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the door
open for more than 2 minutes.
8
Temperature Controls
Temperature
controls
Changing
display
temperatures
from °F to °C
To change the temperature display
between Fahrenheit and Celsius, press
Temp Display °C/°F.
The temperature display shows the actual
temperature of the freezer or fresh food unit.
The actual temperature will vary from the set
temperature based on factors such as door
opening, amount of food, defrost cycling
and room temperature.
NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.
To turn off the cooling system in either
the freezer or fresh food unit, press
the plus (+) pad until the display shows OFF.
To turn the cooling system on, press
the minus (–) pad. The preset temperature of 0°F
for the freezer or 37°F for the fresh food unit
will appear in the display.
To check the current temperature setting for
the fresh food or freezer unit, press the plus (+)
or minus (–) pad once. After 5 seconds, the
display will return to the actual temperature.
To change the temperature settings, press
the plus (+) or minus (–) pad for each increment
to the desired temperature set point. Allow
24 hours for the unit to reach the temperature
you have set.
Temperature Ranges
Low High
Fresh Food
Freezer
NOTE: Setting the controls to OFF stops cooling,
but does not shut off electrical power to the unit.
34°F
1°C
–6°F
–21°C
45°F
7°C
+6°F
–14°C
36” All-Refrigerator and All-Freezer Units
All-Freezer Controls
All-Refrigerator Controls
Preset Settings:
Allow 24 hours to reach these preset temperatures.
Preset Settings:
Allow 24 hours to reach these preset temperatures.
To Next Page
Loading...
Need help?
General
