re and (;leaning
I,l?lll Oven
07) g;vZ
light bulbs
N07_: The glass eover sholdd be removed mdy when
eold. _4_,ari_g"latex gloves may. _f/i_r a better ,g'ri_.)
CAUTION: Beforerepla..g
bulb, disconnect electrical pox_er to the oven
at the main fuse or circuit breaker panel.
Be sure to let the light coxer and bulb cool
completely.
For }our safety do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
1 Turn the glass cover counterch)ckwise
1/4 turn until the tabs of the glass cover
dear the grooves of the socket.
2 Using gloves or a (Ir'_ cloth remove the bulb
b) I)ullin°_ it straight out.
To replace:
1 Use a new 130-volt Halogen, bulb, not to
exceed 50 watts.
3
4
Using gloves or a dr', cloth remove the bulb
from its Ix_(kaging',, Do not touch the bulb
*dth bare fingel_.
Push the bulb straight into the receptacle
all the wa).
Place the tabs of the glass coxer into the
grooves of the socket. Turn the o-lass coxer
clock_dse 1/4 turn.
For improved ligT_ting"inside the oven, dean the ,glass
eoverj}_quently using" a wet cloth. This should be
done when the oven is _omp#tely cool
5 Reconnect electrical power to the oven.
Receptacle Socket
_'_" Bulb
Tab
/
Glasscover
Receptacle
Usegloves
orcloth
PTvbe
The temperature probe may be cleaned with
soap and water or a soap-filled scom'ing pad.
Cool the temperatm'e probe befi)re cleaning,
Scorn" stubborn spots with a soap-tilled scom'ing
pad, rinse and dry.
l)o not imme*:selt_elemperahm, probe in wale*:
l)o nol slore lhe lemperalure probe in lhe ovem
40
To Next Page
Loading...
