GE PACSystems RXi Box IPC User Manual

GE
Intelligent Platforms
Industrial Computer Products
PACSystems*
RXi Box IPC
User's Manual, GFK-2785C
May 2014

GE PACSystems RXi Box IPC Specifications

General

Brand	GE
Model	PACSystems RXi Box IPC
Category	Industrial PC
Language	English

Summary

Introduction

Specifications

Part Numbers

Lists various part numbers for the RXi Box IPC models.

General Specifications

Details general technical specifications like dimensions, weight, processor, RAM.

Environmental Specifications

RXi Box IPC User Features

Power On/Off Switch and Status Indicator Operation

Normal Operation and Shutdown

Describes powering the IPC on/off, sleep mode, and forced shutdown procedures.

IPC Status Indicators

Explains the meaning of IPC status LEDs like SATA Drive and Overtemp.

Ethernet Port LEDs

Details the function of ACTIVITY and LINK LEDs on Ethernet ports.

Resume Power Mode Operation

Sleep Mode Setting Options and Ring LED Status Indicator Operation

Unpacking and Initial Startup

Unpacking and Inspection

Guide for inspecting the IPC upon receipt and checking for damage.

Initial Startup

Steps for the first-time power-up and basic configuration of the IPC.

Configuring Ethernet Network Communications

Instructions for setting up network connectivity for the IPC.

Initial Startup

Configuring Ethernet Network Communications

Pinging TCP/IP Ethernet Interfaces

Determining if an IP Address is Already Being Used

Shutting Down the Computer

Disabling Operating System Shutdown

Hardware Installation

Installation Guidelines

General recommendations for installing the IPC, including airflow and mounting.

Grounding

Mounting Orientation

Dimensions and Clearances for Installation

Mounting Procedures

Mounting the IPC on a DIN Rail

Step-by-step guide for mounting the IPC using a DIN rail.

Backplate Orientation

Explains the correct orientation of the backplate for mounting.

Mounting the IPC on a Panel Using a Backplate

Mounting the IPC Directly on a Panel

Replacing the RTC Battery

Disabling the Off Switch

Connectors and Cabling

Input Power

Requirements and connection details for the IPC's power input.

Ethernet Communication Ports

Serial Communication Port

USB Ports

Video Output Port

SD (Secure Digital) Card Slot

Audio Jack

System Recovery

Recovering from a Drive Failure (ICRXIBN7x000x Models only)

Steps to re-install the OS and drivers after a drive failure.

Recovering from a Drive Failure (ICRXIBN7x001x Models only)

Recovering from an Overtemperature Shutdown (All Models)

Product Certifications and Installation Guidelines for Conformance

Agency Approvals

Standards Overview

Government Regulations