GE PFSF6PKWBWW - Freezer Door and Drawer Installation

Installation Instructions
[] REMOVE THE FREEZER DOOR
[] Pullthe freezer door open to full extension.
[] Removethe freezerbin bu pulling both brackets upward
at the same time. (Seepage 10.}
[] Takeout the lower basketby lifting the basket up from
the rail sgstem.{Seepage 10.)
[] Removethe two 10mm hex-head boltsfrom the right
and left side.
[] REMOVE THE FREEZERDOOR lcont.)
[] Usethe tip of a screwdriver to separate the railfrom
the rail cover.Tiltthe front end up and lift the entire door.
[] Setthe door front on a nonscratching surface.
[] Pushthe rail assembliesback into the cabinet.
CAUTION:Pushboth sidesof the rail
assembliesback at the same time.
[] REPLACING THE FREEZER DOOR
Two people mag be requiredto complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
[] Pullout the rail assembliesto the full length on each side
ofthe cabinet.
.ii CAUTION: Makesureto pull out the side
railsevenlg.
19