Installation Instructions
INSTALLING THE REFRIGERATOR(cont.)
[] REPLACINGTHE FREEZERDOOR (cont.)
[] Hangthe freezer door front onto open slots
on the sides.
Slot
[] Tighten screws completely. (Thereare four 10 mm
hex-headbolts.)
REPLACE THE FREEZER BASKET
Replacethe freezerbasket bg lowering it into the frame.
[] REPLACINGTHE FREEZERDOOR (cont.)
REPLACE THE FREEZER BIN
Hook the ends of the freezer bin into both brackets,
and push down until they lock into place.(Seepage 10.)
[] CONNECTING THE REFRIGERATOR
TO THE HOUSE WATER LINE
[]
A cold water supply is requiredfor automatic icemaker
operation. If there isnot a cold water supply,you will
need to provide one. SeeInstalling the Water Line
section.
NOTE:Beforemaking the connection to the refrigerator,
be sure the refrigerator power cord is not plugged
into the wall outlet.
If gou are using copper tubing, place
a compression nut and ferrule (sleeve) onto
the end of the tubing coming from the house
cold water supplg.
If gou are using the GE SmartConnect TM
tubing, the nuts are already assembled
to the tubing.
2O
To Next Page
Loading...
