GE PFSF6PKWBWW - Installing the Water Line

Installation Instructions
INSTALLING THE WATER LINE
BEFORE YOU BEGIN
Recommended copper water supplg kits are WX8X2,
WX8X3 or WX8X4, depending on the amount of tubing
gou need. Approved plastic water supplg lines are GE
SmartConnect T"Refrigerator Tubing (WXO8XIO006,
WXO8XIO015 and WXO8XlO025).
When connecting gour refrigerator to a GE Reverse
Osmosis Water Sgstem, the onlg approved installation
iswith a GE RVKit. For other reverse osmosis water
sgstems, follow the manufacturer's recommendations.
If the water supplg to the refrigerator is from
a Reverse Osmosis Water Filtration Sgstem
AND the refrigerator also has a water filter,
use the refrigerator's filter bgpass plug. Using
the refrigerator's water filtration cartridge in
conjunction with the MWF filter can result
in hollow ice cubes.
This water line installation is not warranted
bg the refrigerator or icemaker manufacturer.
Follow these instructions carefullg to minimize
the risk of expensive water damage.
Water hammer (water banging in the pipes) in
house plumbing can cause damage to refrigerator
parts and lead to water leakage or flooding. Call a
qualified plumber to correct water hammer before
installing the water supplg line to the refrigerator.
To prevent burns and product damage, do not hook
up the water line to the hot water line.
If gou use gour refrigerator before connecting the
water line, disable the icemaker bg turning the Ice
Off feature ON. See About the Automatic Icemaker
for more information.
Do not install the icemaker tubing in areas where
temperatures fall below freezing.
When using ang electrical device (such as a power
drill) during installation, be sure the device is double
insulated or grounded in a manner to prevent the
hazard of electric shock, or is batterg powered.
All installations must be in accordance with local
plumbing code requirements.
WHAT YOU WILL NEED
J
• Copper or GE SmartConnect" Refrigerator
Tubing kit, 1/4" outer diameter to connect the
refrigerator to the water supplg. If using copper,
be sure both ends of the tubing are cut square.
To determine how much tubing gou need: measure
the distance from the water valve on the back of
the refrigerator to the water supplg pipe. Be sure
there is sufficient extra tubing to allow the
refrigerator to move out from the wall after
installation.
GE SmartConnect T"Refrigerator Tubing Kits are
available in the following lengths:
6' (1.8 m) - WXO8XIO006
15' (4.6 m) - WXO8X10015
25' (7.6 m) - WXO8X10025
24