SYSTEM
12:00 PM I
METRIC
Button
ge.com
ICEMAKER
Button
WATER FILTER: GOOD
SETTINGS (cont.)
UNITS
To change the temperature readingsfrom Englishunits to Hetric units,
pressthe NETRICbutton. Unitsshown on the HONEscreen will now read
in Celsiusinstead of Fahrenheit.
0 SCREEN
Button
ICEMAKER
The icemaker will produce seven cubes per cycle-approximately
100-130 cubes in a 24-hour period,depending on freezer compartment
temperature, room temperature, number of door openings and other
useconditions. Ifthe refrigerator isoperated before the water connection
is madeto the icemaker,press and releasethe ICENAKERbutton on
the SYSTEMscreento disengagethe icemaker.When the refrigerator
has been connected to the water supply, press and releasethe ICENAKER
I button on the SYSTEMscreento engage the icemaker.A newly installed
refrigerator may take 12 to 2/4hoursto begin making ice cubes and
the ICENAKERdefault is ON (check).
Youwill hear a buzzing sound eachtime the icemaker fillswith water.
Throw away the first few batches of ice to allow the water line to clear.
It isnormal for severalcubes to bejoined together. If iceisnot used
frequently, old ice cubes will become cloudy, taste stale and shrink.
NOTE:In homes with lower-than-average water pressure,you may
hear the icemaker cycle multiple times when making one batch of ice.
NOTE:TurnOFFthe icemaker ifthe water supply is shut off.
'SETTINGS
SCREEN
Selectthe SCREENbutton from the SETTINGSscreen to adjust
the BRIGHTNESSof the display and to choose a SCREENSAVER.
ForBRIGHTNESS,usethe LEFTand RIGHTarrow keysto dim and
brighten the screen.
ForSCREENSAVER,usethe UPand DOWN arrow keys to choose
DEFAULT,SLIDESHOW,BACKGROUNDor OFF.
DEFAULTgives a slide show of factory pre-loaded pictures at lO-second
intervals.Thesepictures are not viewable in the PHOTOSscreen and
remain even when all photos are deleted.
SLIDESHOW takes the most recently selected photo among
user-uploaded picturesand displays this one first, then the remaining
random photos at lO-second intervals for 15 minutes.
BACKGROUNDtakes the most recently selected photo among
user-uploaded picturesand displays this as a static image.
After 15 minutes of displaying this screen with no activity,
the backlight will go OFR
OFFsets no BACKGROUND,SCREENSAVERor SLIDESHOW.
SetScreenSaverand/or 0 SetBrightness
Background ofScreen
11
To Next Page
Loading...
