About the control with temperature settings for non-LeD models.
f
TURBO FREEZE TURBO COOL
Hold 3 sec Hold 3 sec
for Turbo Freeze or Turbo Coo
(Hold 3 sec (Hold 3 sec
to Reset Filter} to Lock Control)
NOTE:Therefrigerator isshipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
Thetemperature controlsare presetin the factory at 38°Ffor therefrigerator compartment and -2°F for
the freezercompartment. Allow 24 hoursfor the temperature to stabilize to the presetrecommended settings.
Thetemperature controlscan display both the SETtemperature as we!!asthe actual temperature in the
refrigerator and freezer.Theactual temperature mag vargslightlg from the SETtemperature based on usage
and operating environment.
ADJUST
REFRIGERATOR
{Hold 3 sec
for Turbo Cool)
FREEzERADJUST
{Hold 3 sec
for Turbo Freeze)
Changing the Temperature
Tochange the temperature, pressand
releasethe ADJUSTFREEZERor ADJUST
REFRIGERATORpad.Thedisplay will
show the actual temperature. To change
the temperature, tap either the ADJUST
FREEZERor ADJUSTREFRIGERATORpad
untilthe desiredtemperature is displayed.
Oncethe desiredtemperature hasbeen
set, the temperature display will return
to the actual refrigerator and freezer
temperatures after 10 seconds.Several
adjustments may be required.
Eachtime you adjust controls, allow
24 hours for the refrigerator to reach
the temperature you haveset.
12
To Next Page
Loading...
