Installation Instructions
INSTALLING THE REFRIGERATOR {cont.}
[] REMOVE THE FREEZER DOOR (cont.J
r_ usethe tip of a screwdriver to separate the railfrom
the railcover.Tiltthe front end up and lift the entiredoor.
r_ set the door front on o nonscratching surface.
r_ Pushthe roil ossembliesbock into the cobinet.
CAUTION:Pushboth sidesof the rail
assembliesback at the some time.
[] REPLACING THE FREEZERDOOR
Two people mog be requiredto complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
r_ Pullout the rail assembliesto the full length on each side
of the cabinet.
CAUTION: Hokesureto pull out the side
roilsevenlg.
I_ REPLACINGTHE FREEZERDOOR (cont.I
rB] Hangthe freezer door front onto open slots
on the sides.
Slot
_'] Tighten screwscompletelg. (Thereorefour
10 mm hex-head bolts.)
REPLACE THE FREEZER BASKET
Replacethe freezer basket bg lowering it into the frame.
3O
To Next Page
Loading...
