Installation Instructions
INSTALLING THE REFRIGERATOR {cont.}
LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1} Leveling legs adjust so the refrigerator is
firmlLI positioned on the floor and does not
wobble.
2} Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
rA1 Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
Flat-HeadScrewdriver
CAUTION: Toavoidpossible
personal injurg or propertg damage,
the leveling legs must be firmly touching
the floor.
r_] LEVELTHE REFRIGERATORDOORS
Remember a level refrigerator is necessarLI for
getting the doors perfectly even. If you need help,
review the previous section on leveling the
refrigerator.
When
the left
dooris
lowerthan
the right
door.
Adjustment
point
Adjustment
point
When
theleft door
ishigher
than
theright
door.
r_ if gou open the freezer door, gou can see
the center hinge.
r_ Insert the supplied 4 mm Allen wrench into
the shaft of the center hinge.
LEVEL THE REFRIGERATOR DOORS
(cont.)
r_ Adjust the height bLIturning clockwise
or counterclockwise. When Llou turn
counterclockwise, the door will move up.
r_ After adjusting the doors, insert the supplied
fastener ring using a pair of pliers in the gap
between the hinge grommet and the center
hinge. The number of fastener rings Llou will
need to insert depends on the gap.
NOTE: Four fastener rings are enclosed with
the refrigerator. Thickness of each fastener ring
is 0.04".
32
To Next Page
Loading...
