15480D / October, 2004
Specifications
Voltage 10 to 16VDC
Current 14mA Typical 20mA max.
Maximum loop rating 16 VDC, 50mA
Alarm output Fail safe contacts-closed loop
Normally Closed (N.C.)
Alarm duration 5 seconds ( ± 0.5 sec.)
Cover tamper contacts Closed loop
Rating 16V, 50mA
Operating temperature 14°F to 122°F (-10°C to 50°C)
Humidity 5 to 95% non-condensing
Pulse count Two-pulse or three-pulse
RFI immunity Greater than 10V/meter from 10 to
1000MHz
Static Immunity 20 kV
Lightning immunity 2.4 kV, 1.2 joules max. energy
impulse, 100 usec duration on field
wiring
Detection range:
PI6000 Pet Immune 40’ (12.2m) x 90°
6000 High Density 35’ (10.1m) x 90°
Mounting Flat wall or corner
Dimensions:
Width 3.05" (7.75cm)
Depth 1.90" (4.83cm)
Height 2.68" (6.81cm)
Color White
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
FaxBack: 800-483-2495
wm
GE Security
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
Figure 7. Dimensions
Front View Side View
2.68”
6.81cm
3.05”
7.75cm
1.90”
4.83cm
The unit should be connected to a UL Listed power supply or control unit
capable of providing a minimum of 4 hours standby power.
The equipment should be installed in accordance with NFPA 70.
The unit should be tested at least once a year.
Model Description Listing
PI6000 40’ x 40’ PIR with 30 lb Pet Immune Lens, closed loop, with tamper C-UL US
6000 35’ x 35’ PIR with High Density Lens, closed loop, with tamper C-UL US
Product Ordering
g
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Previous Page
Loading...
Need help?
General
