GE Profile 24 Series User Manual

18
Customer Service Troubleshooting Tips
Operating Instructions
Safety Instructions
Installation Instructions
Customer Service Troubleshooting Tips
Installation Instructions
Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips
Installation Instructions
Safety Instructions
Operating Instructions
Replacing the light bulbs.
Turning the control to the OFF or position does not remove power to the light circuit.
Fresh Food Compartment—Upper Light
Unplug the refrigerator.
To align the control knobs properly,
note position of each knob for proper
reassembly, move both knobs all the way
to the left, then pull them off.
To remove the light shield, pull it
straight out.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the light shield.
Replace the control knobs, move them to their
previous settings and plug the refrigerator back in.
3
2
1
FREEZER
TEMPERATURE
COLD
OFF
COLDEST
1
3
5
*
7
9
FRESH FOOD
TEMPERATURE
COLD COLDEST
1
3
5
*
7
9
Profile
*INITIAL TEMPERATURE SETTINGS
ALLOW 24 HRS. FOR TEMP. TO STABILIZE
Fresh Food Compartment—Two Lower Lights (on some models)
These lights are located behind the top drawer.
Unplug the refrigerator and remove the
top drawer and cover.
Grasp the bottom of the light shield
and pull it forward and up to free its
bottom edge.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the light shield,
drawer and cover and plug the refrigerator
back in.
2
1
Freezer Compartment
Unplug the refrigerator.
Remove the shelf just below light panel.
Pull the plastic light panel, which is
underneath the ice compartment,
toward you.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the panel and
shelf, and plug the refrigerator back in.
3
2
1

GE Profile 24 Series Specifications

General

Brand	GE
Model	Profile 24 Series
Category	Refrigerator
Language	English