EasyManua.ls Logo

GE Profile PSB42LSRBV

GE Profile PSB42LSRBV
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 DOOR ALIGNMENT
Stand back from the refrigerator to inspect
the door alignment.
Shipping or the addition of heavy door
panels may have caused the doors to move
slightly out of alignment.
If necessary, the Fresh Food door may
be adjusted up or down to align with the
Freezer door.
Loosen the leveling mechanism.
Use a 7/32 wrench to adjust the hinge pin
as shown.
Tighten the leveling mechanism.
14 START ICEMAKER
Flip the switch to I (ON). The icemaker will
begin operation automatically.
Make sure nothing interferes with the
sweep of the feeler arm.
Discard the first full bucket of ice cubes.
To turn the icemaker off, set the switch to
O (OFF).
15 INSTALL TOEKICK
Locate the supplied toekick (shipped taped
to the top of the refrigerator). Install with
2 screws provided.
A custom toekick (not supplied) can be
installed to match or complement the
surrounding cabinets. Use the supplied
toekick as a template to cut the shape.
Power Switch
Green Power Light
Feeler Arm
Supplied Toekick
1/4" or Thicker Toekick
Bushing
D
o
o
r H
in
g
e
C
a
se
H
in
g
e
7/32" Wrench
Raise
Clockwise
Installation Instructions
33

Other manuals for GE Profile PSB42LSRBV

Related product manuals