About the temperaturecontrols, ww .GEAppliances.com
I
f
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to Ostops coofing in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will varybased on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
PerformanceAir FlowSystem
Tile Performance Air Flow System is designed to maximize temperature control in tile refrigerator and
freezer compartments. This unique special feature consists of tile Air Tower along tile back w_l of tile
refrigerator and tile Air Tunnel on tile t>attom portion of tile freezer rear v_l. Placing food in front of tile
louvers on these components will not affect performance. Aithough tile Air Tower and tile Air Tunnel can
be removed, doing so will affect temperature performance. (For remo'_al instructions, on-line, 94 hours a
day, contact us at GEAppliances.com or call 800.GE.C_MLES.In Canada, contact us at w-a-a_.geappliances.ca
or call 1.800.361.3400.)
5
To Next Page
Loading...
Need help?
General
