Menu Functions
The Menu is used to make changes such as
setting color, channels, timers, etc.
Entering the Menu Mode:
1. Push the DEVICE
button on the remote.
2. Push the MENU
button.
This puts the remote
in Menu Mode. The
Menu should now be
visible on the
television. The
INDICATOR LIGHT
will blink continuously
to indicate the remote
is now in Menu
Mode.
While in MENU these
buttons will function
as follows:
VOL UP/DOWN buttons
will operate as CURSOR
RIGHT/LEFT.
CH+/- keys will operate
as CURSOR UP/DOWN.
For RCA, GE and ProScan,
pushing the MENU button
will select the highlighted
item. The numeric buttons
may also be used to
select the MENU choice.
NOTE: Not all functions in competitive mod-
els and brands of televisions may be fully sup-
ported.
10
BLINK
94905 Revised Size 2/25/02 4:22 PM Page 11
To Next Page
Loading...
Need help?
General
