To Next Page

To Previous Page

Programming For Second Device

If you have not programmed the AUDIO•AUX button

for audio components, you can assign a second TV,

DVD, CD player, VCR, Satellite System, or Cable Box

to it.

1. Manually turn on the

device you wish to con-

trol. Find the three digit

code for the device you

wish to program in the

code list.

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then release

the CODESEARCH but-

ton.

3. Press and release the

AUX button (The INDI-

CATOR LIGHT will blink

then remain lit.)

4. Enter the code using

the Number Buttons. After

your code is entered, the

INDICATOR

LIGHT will turn off. If the

code is not valid, the

INDICATOR LIGHT will

blink. Check the code list

and repeat process.

5. Aim the remote at the

device you wish to control

and press the ON•OFF

button. The device should

turn off.

6. With your device on,

press CHAN+ (CHAN-

NELUP) or ON•OFF but-

ton. If the device

responds, no further pro-

gramming is required.

NOTE: If your device does not respond, try all the

codes for your brand. If the codes do not work,

or your brand is not listed, try the Code Search

method on page 16.

7. Enter your code and the type of device you

programmed here for easy reference.

94925 Revised Size 2/25/02 4:00 PM Page 12

Brand	GE
Model	RM94925
Category	Remote Control
Language	English

GE RM94925 User Manual

Table of Contents

Questions and Answers:

GE RM94925 Specifications

Related product manuals