Need help?Do you have a question about the GE SBC330 3U VPX and is the answer not in the manual?
General| Form Factor | 3U VPX |
|---|---|
| Storage | SATA SSD |
| I/O Interfaces | DisplayPort, USB |
| Ethernet | Gigabit Ethernet |
| Power Supply | VPX power |
| Operating Temperature | -40°C to +85°C |
| Operating System Support | Linux, VxWorks |
Key hardware specifications and capabilities of the SBC330 board.
Important safety precautions for operating the SBC330 equipment.
Guidelines for safely handling the SBC330 board.
Details on how to identify the SBC330 board via labels.
Procedures for visually inspecting the SBC330 for physical damage.
Instructions for installing the SBC330 into a 3U VPX backplane.
Requirements for proper cooling of the SBC330 board.
Steps and considerations for powering up the SBC330.
Detailed steps of the board's power-on sequence.
Diagram and explanation of jumper positions on the SBC330.
Configuration options for the P10 header related to Flash memory.
Configuration options for the P12 header for JTAG and AMP/SMP modes.
Overview of the SBC330's key features and capabilities.
Schematic illustrating the SBC330's internal architecture.
Description of the MPC8641D processor and its functions.
Details about the board's memory map, RAM, and Flash.
Details on the board's PCI Express connectivity and components.
Functionality of the Local Bus Control FPGA.
Details on the I2C bus, addressing, and connected devices.
Handling of system resets, interrupts, and error conditions.
Information about the JTAG interface and configuration.
List and addresses of FPGA registers for the SBC330.
Registers related to interrupt handling and configuration.
Registers for configuring General Purpose I/O pins.
Register for configuring platform clock multipliers.
Register for configuring processor core multipliers.
Register for controlling Flash memory settings and protection.
Registers for configuring and monitoring watchdog timers.
Description of green user status LEDs on the SBC330.
Description of red BIT status LEDs on the SBC330.
Description of yellow Ethernet link status LEDs on the SBC330.
Description of blue power status LEDs on the SBC330.
Description of orange PCIe link status LEDs on the SBC330.
Overview of operating systems supported by the SBC330.
Description of Built-In Test (BIT) functionality.
Details on the U-Boot boot firmware for the SBC330.
Description of the VPX connector types used on the SBC330.
Detailed pinout information for the SBC330's connectors.
Summary of the SBC330's technical features and capabilities.
Electrical characteristics and voltage/current requirements.
Predicted Mean Time Between Failures (MTBF) values.
Details on SBC330 build levels and environmental ratings.
Physical dimensions and weight of the SBC330.
To Next Page