16
Drawer
and pan
removal
To remove a drawer or pan:
1. Pull the pan out to the stop position.
2. Lift the front of the pan up and out of
the wire holder.
3. Lift the back of the pan up and out.
To replace a pan:
1. Place the back of the pan in the wire holder,
making sure the wire holder fits into the
grooves on the back of the pan.
2. Lower the front of the pan into the wire
holder.
3. Press firmly on the top of the pan to snap it
into the wire holder.
Climate Control Drawer and Storage Pans
Built-In Refrigerators
To Next Page
Loading...
Need help?
General
