“..,
.,
“~Q~” flashes.After
4 seconds,“START”
flasheson display.
The Popcorn feature is designedto be used only
1
with prepackagedmicrowavepopcorn weighing
m
Step 4: TouchSTART.The
3.0 to 3.7 ounces.
popcorn sensorautomatically
Step 1: Remove the outer wrapper from the
calculatesthe cooking time.
microwavepopcorn.
6
d
Step 2: Open oven doorand place package of popcorn
in the center of the oven floor as directed by the
manufacturer’sinstructions.Close oven door.
1’ 1
Step 3: TouchPOPCORN pad.
POPCOI?N
I
COOK
TlfVIE
After the popcorn
sensordetects steam,
the oven signalsand
displaysremaining
cooking time needed.
$tep 5: When cooking
is completed, the oven
signalsand flashes
“End.” Open the
door and remove
the popcorn,
Howto thePOP toProvidea shorteror Longer Cook Time
If your favorite popcorn is not completely popped,
If your favorite popcorn is overcooked, there is
there is a simple adjustment you can make.
another adjustmentyou can make.
Touch the POPCORN
pad and then touch
number pad 9. The
word “POP” will
appear on the display
with a plus sign beside
it. The plus sign
indicates 20 seconds
more cooking time is
being provicicd.
Touch the POPCORN
pad and then touch
number pad 1.The
word “POP” will
appear on the display
with a minus sign
beside it. The minus
sign indicates 20
seconds less cooking
time isbeing provided.
cmIuse regular’popcorn withmePop(xml
feature‘inmy mimmaveova-l?
No. This automatic function is designed to be used
only with prepackaged microwave popcoi.n.
.————.————.—— -
—-—
..—
..-..-—.